PROBLEM:
Issue about no signal and unable to detect sim card in the bundled program in the SMARTBRO USB MODEM MF627 when running it on Windows 7. Upon checking it out in the device manager, a (!) sign was present. This is an issue about compatibility with the ZTE drivers on Windows 7 platform. However, there seems to be no problem to the earlier versions of SMARTBRo prepaid when running in Windows7.
MY DIGITAL FIX:
1. First, unplug the SMARTBRO device and uninstall completely in the Windows Program Manager (located in the Control Panel) the previously installed SMARTBRO program. (If you have installed it earlier and it failed to detect signal or having other problems).
2. Plug-in the SMARTBRO Modem Device. Wait for the AUTOPLAY DIALOGUE BOX to appear.
3. Do not click AUTORUN, rather click OPEN FOLDER TO VIEW FILES.
4. Once the window appears, go inside the INSTALLER FOLDER by double clicking it.
5. Right-click SETUP and click TROUBLESHOOT COMPATIBILITY just below Run as Adminsitrator.
6. Allow it to detect issues, it would take about 10-30 seconds. If it takes longer, be patient.
7. Click TRY RECOMMENDED SETTINGS, then it will proceed to RESOLVING ISSUES activity and finally it will recommend a setting that best suits the program.
8. Click START THE PROGRAM. Follow-on the installer's regular commands to complete the install.
9. After installing, you may now test the SMARTBRO plug-in device software to connect to the internet. There should be no more problems detecting the signal and the sim.
10. Click NEXT in the COMPATIBILITY DIALOGUE BOX and click YES, SAVE THESE SETTINGS FOR THIS PROGRAM.
0 comments:
Post a Comment